Starting Monday November 7th, 2016 come to Shelby Vacuum and Layaway any vacuum of your choice for the Christmas Holiday!! Pick up by Dec. 23rd, 2016 and receive a FREE Spin Mop on purchases of $399.95 and up!! Don't miss your chance to get the vacuum that you've been wanting!!!

Don't let your home improvement projects frustrate you, come to H&M and let us help...FREE estimates on Vinyl Siding, Vinyl Windows, Metal Roofing and more....

Let Shelby Vacuum know what kind of day your having!!!...103 Pine St., Shelby, NC, 28152, 704-471-9979..We sell the BEST and fix the REST!! Come by today..

WINDOW FRAME CLEANING

Cleaning windows means more than just cleaning the glass. Here are some helpful tips for cleaning your window and frame effectively without damaging them.

•  Make sure to vacuum any dirt from sill and track areas before washing. •  Use a mixture of mild dish soap* and water for cleaning of window frame. •  Rinse completely with clear water and make sure to wipe dry. •  Make certain that drainage or "weep" holes are clear of dirt or obstructions both inside and outside of the window frame.       * Ivory soap is an example of a mild dish soap. Always test cleaners in an inconspicuous area before using.

	GLASS CARE

Glass care today has never been more important. Insulating low-e or heat reflective glass requires proper maintenance to ensure complete effectiveness.

•  Clean glass with a mixture of mild dish soap and water. Rinse completely with clear water then wipe dry with a soft cloth to avoid water spots. •  Avoid cleaning glass in direct sunlight. •  DO NOT USE any petroleum-based cleaners or caustic chemicals to clean glass. •  DO NOT USE any razor blade, putty knife or any abrasive pad to clean glass. •  DO NOT USE a high-pressure spray nozzle when rinsing windows after cleaning.

	R-5 Low E Window Hand Cleaning Recommendations

Comfort E-PS™ is a pyrolytically coated (hard coat) low emissivity glass. The coated surface is durable and has a slight texture inherent on this type of coated glass. Hand cleaning of Comfort E-PS™ is only slightly different than cleaning of non-coated glass. Following the recommendations below will result in successfully cleaning Comfort E-PS™. It is very important to read all care instructions before cleaning your high energy efficient R-5 windows with Comfort E-PS Low E Glass. Special care is needed to maintain the beauty and performance of your new windows.  Never use ANY type of scraper, plastic or metal, on the coated surface. Remove rings and other objects that would come in contact with the coated glass.  Regular Cleaning

•  Thoroughly clean the surface of the glass with a clean sponge or soft cloth and plain water to remove surface contaminates. •  Dry with a clean soft cloth. Use a clean sponge or soft cloth to wash the surface with a solution of 10% to 20% vinegar. Always use a new soft cloth or a squeegee to dry the glass. Cleaning may cause streaks when dried if the glass is exceptionally dirty. In this case repeat cleaning. Care should be taken with rubber squeegees as they can leave streaks that are extremely hard to remove if they are used incorrectly or are in poor condition.  •  Commercial glass cleaners (WINDEX®, GLASS PLUS®, etc.) may be used, but some may leave a film residue and may cause smearing. If these situations occur repeat the cleaning process using vinegar based cleaner. Vinegar based cleaners tend to cause less streaking than other types of cleaning solutions. The most important consideration is to remove as much contamination from the coating as possible with the plain water wash before attempting final cleaning.

Special Cleaning  For unusually hard to remove contaminates such as crayons, wax, grease, markers and adhesives, special cleaners may be used to spot clean the glass. Denatured alcohol and isopropyl alcohol work on a variety of contaminates. For harder to remove contaminates such as crayons and markers, commercially available cleaners such as Goo Gone® and Goof Off® work well. After spot cleaning, the full glass surface should be cleaned as discussed above.

	SCREEN CLEANING

•  Remove screen from window and wash on a clean flat surface with mild soap and water, and a soft brush (if needed). Rinse, wipe dry and reinstall. •  DO NOT USE a high pressure spray. It will cause damage, rip screens, and cause window seals to become unstable.

	CONTINUED SMOOTH OPERATION

To ensure that your windows continue to open, close, lock and unlock easily, follow these helpful tips.

•  Moving parts in hardware components and tracks should be lubricated periodically in accordance with the included manufacturer's maintenance instructions. If you are located in a salt air environment, this can mean cleaning as well as lubricating, monthly. •  Check weather stripping around all operable window panels to be sure it seals evenly. •  Check and clean weatherstripping by lightly brushing the pile. •  Make sure track is kept clean by vacuuming to clear any dirt or debris.

	CARE INSTRUCTION

•  Check window annually and recaulk (outside and inside) as needed.

	CONDENSATION AND MOLD

Window condensation can be natural occurrence and may be a warning that too much moisture is present and could cause structural deterioration and the potential of mold growth.

•  Condensation on the inside of a window is a result of a higher air moisture content contacting the lower temperatures on the glass. Higher interior humidity and the lower outside window temperature can cause condensation. •  Excessive interior humidity can cause structural damage and health concerns if high moisture levels are sustained inside wall cavities. Wood rot, mold and mildew may result. •  Make sure to check all sashes for smooth adequate operation. •  Use exhaust fans, especially when showering. •  Install and use a dehumidifier and ceiling fans to circulate air. •  Periodically open windows and doors whenever practical to allow interior moisture to escape.

OUTDOOR Condensation: Under some climate conditions, condensation may occur on the exterior glass surface of a window. This is more likely to occur on higher-performance windows with Low-E coatings and low-conductance gas fills that create very low factors. For exterior condensation to occur, the glass temperature must be below the outdoor dew point temperature. This is most likely to happen when there is a clear night sky, still air and high relative humidity, in addition to the right temperature conditions. Like other dew formed at night, exterior window condensation will disappear as surfaces are warmed by the sun. It is excellent thermal performance of the well-insulated glazing that created the condition where the outer glass surface can be cold enough to cause condensation to form.

Vacuum cleaner maintenance

You’ll spend less time vacuuming and achieve better results when your machine sucks up and bags dust and dirt efficiently. Efficiency happens when you use common sense and occasionally inspect the machine to ensure all components are working properly.

Maintenance doesn’t always involve tipping the vacuum cleaner over and removing parts. Following is a quick checklist for what to do (and not do) before and during vacuuming:

Check the bag before each use. Keep it emptied, or discard it, once half full. At that point, the pores in the bag are clogged enough to reduce suction by nearly half. Reduced suction means more back-and-forth strokes to clean a carpet or rug, and it increases chances that dust will be blown back into the room as you work.

Pick up small, hard objects before vacuuming — don’t make the vacuum do it. These objects can damage components inside your vacuum cleaner, reducing suction. In particular, look out for metal objects such as coins, paper clips, tacks and the like. Also, be sure to remove small toys and other objects that could jam or damage the machine.

Don’t abuse the cord by running over it or pinching it in doors and under or around furniture. Move the plug to a new outlet before it reaches its limit, instead of waiting until the plug gets yanked out of the wall and bending the plug blades. Never use an extension cord, which can overheat the motor and/or electrical cords.

Height adjustment is important in both effective cleaning and reducing wear on the motor and other interior components of an upright vacuum. Don't abuse the machine by letting small kids "ride" on top of it while you work, for example.

Now, on to the mechanical checks, most of which should be performed at least once a year:

Inspect belts and replace any that are stretched, worn or frayed.

Check impeller blades for damage and replace the assembly if necessary. Chips in the blades are the most frequent form of damage.

Remove wound-on hair or string from the beater bar with a utility knife. Replace the beater bar or brush strips when necessary. Brushes that are worn down or distorted from heavy use can't be expected to agitate dirt well enough for removal by suction. Also check for cracks or any jagged edges in the beater bar, which can damage carpeting.

Purchase only original-equipment replacement parts sold by dealers or manufacturers. Most warranties in force will be invalidated by installation of parts not made by the original manufacturer. Parts and supplies are available from dealers listed in the yellow pages under “Vacuum Cleaners — Service and Repair” and “Vacuum Cleaners — Supplies and Parts, or just swing by Shelby Vacuum!! 103 Pine St., Shelby, NC, 28152

Did you know that smiles were contagious??...Well here at H&M we're always smiling, so come by today and receive and Free smile, and a FREE estimate on your new Vinyl Siding, Vinyl Windows, Metal Roofing and more...

Shelby Vacuum is having a GREAT day, what about you?!? Repairs, Sales, Trade-ins, Service/Maintenance, Mon-Fri, 10:00-5:00..Come on by and let us help your machine clean your house better than ever!!